简体中文
Roper Gear Pump 18AP06
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Flange Mounted with Relief Valve, Packed Box
$1,453.00 Including Tax is $1,806.08
Available on backorder
Description
A Series General Purpose Pumps
General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
Up to 59 GPM ● Up to 300 PSI
Roper A Series pumps are adaptable to a wide range of applications pumping clean fluids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer.
These pumps are designed to operate at standard motor speeds, with provisions for flange or foot mounting. The internal bearings are lubricated by the fluid being pumped. With only two moving parts, the pumps run quietly.
They are manufactured and assembled with close tolerances, and regularly tested to insure dependable performance. Factory assembled for clockwise rotation (facing the pump drive shaft end), most may be reassembled for operation with equal effi ciency in a counter-clockwise rotation.
MATERIALS OF CONSTRUCTION
Standard Fitted
Housing ……………………………………. Cast Iron
Gears ……………………………………….. Ductile Iron*
Hardened Steel**
Bearings……………………………………. Bronze
Idler Shafts ……………………………….. Ductile Iron*
Steel**
Drive Shafts ………………………………. Hardened Steel
Optional Materials
Housing ……………………………………. Ductile Iron***
Bearings……………………………………. Iron, Carbon
*06 and larger sizes. **03 and smaller sizes.
***In 005, 01 and 02 sizes
FEATURES
■ Designed to operate at standard motor speeds
■ Bi-directional rotation
Quiet-Running Helical Gears
Accurate machining insures:
■ proper meshing
■ reduced friction and vibration
■ quiet, efficient operation
■ long life
Long-Lasting Bearing Surfaces
■ Bearings are special wear-resistant, high-lead bronze. (Iron and carbon bearings are available.)
■ Four heavy duty sleeve bearings give positive support to pumping gears and insure long, efficient service.
Precise, Rugged, Maintenance-Friendly Design
■ All castings are cast iron.
■ Precise manufacturing tolerances provide minimum clearances for maximum pumping efficiency.
■ Large, hardened steel dowel pins insure positive alignment between the faceplate, case, and backplate.
Additional information
| Weight | 40 lbs |
|---|---|
| Dimensions | 22 × 12 × 12 in |
| PORT SIZE(in) | 1 1/4 |
| MAX FLOW(gpm) | 11.2 |
| MAX SPEED(RPM) | 1800 |
| MAX PRESSURE(psi) | 150 |
| MAX TEMPERATURE(℉） | 250 |
| SEAL OPTION | Packed Box |
| PUMP MODEL | |
| COUNTRY OF ORIGIN | USA |
Brand
Brand
ROPER
You may also like…
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Flange Mounted
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Flange Mounted, Packed Box
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Foot Mounted, Mechanical Seal
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Flange Mounted with Relief Valve
11.2 gpm, 150 psi, 1 1/4 in NPT Ports, Foot Mounted with Relief Valve
